In the iron core, the part of the winding is called “core column” , and the part of the magnetic circuit that does not have the winding is called “Iron Yoke” . Where iron core around the winding is called Shell Type; where the winding around...

The transformer is made according to the principle of electromagnetic induction. There are two windings, a primary windings and a secondary windings on top of the closed iron core. When the original winding plus AC power supply voltage. There is alternating current in...

Since silicon steel has the advantages mentioned above, why not use the whole silicon steel as the iron core and process it into sheets? This is because the flaky core reduces another type of iron called “Eddy current loss” . When a transformer works,...

The actual transformer always works in the AC state, the power loss not only in the coil resistance, but also in the AC current magnetization of the iron core. The power loss in the iron core is usually called “iron loss” , which is caused by two reasons,...

The iron core is mainly composed of the iron core body, the fastener and the insulation: The iron core body, the magnetic conductor, is made of the electrical steel sheet. Fasteners, clamps, screws, glass straps, rigid straps and gaskets, etc. . Insulation Parts,...

The common transformer core is usually made of silicon steel sheet. Silicon steel is a kind of silicon (silicon also known as silicon) steel, its silicon content in 0.8 ~ 4.8% . Silicon Steel is used as the core of the transformer because silicon steel itself is a...